Choosing a commercial industrial refrigeration system for your workshop means balancing cooling capacity, available power, tank size, and upfront listed price. The four water chillers here span from a $293.89 secondhand compact unit to a $5,999.99 15-ton industrial machine. Whether you run a CNC, laser engraver, plastic molding line, or other heat-generating equipment, the right chiller keeps downtime low without forcing you to overspend on capacity you won't use. The key is to match the compressor's heat-removal rating to your equipment's actual heat load, then confirm that your facility can handle the electrical connection.
Quick take: The CREWORKS 15 Ton 22HP is listed at $5,999.99, while the Gletscher 15 Ton 22.1 HP comes in at $5,399.99. The VEVOR 5HP portable sits at $2,499.90, and the secondhand OMTech CW-5200 is the entry point at $293.89. If you need maximum industrial heat removal, the two 15-ton units are the heavy lifters; if you want a compact unit, the OMTech's 110V input and low price are notable.
| Product | Listed Price | Price Bar |
|---|---|---|
| CREWORKS 15 Ton 22HP | USD 5,999.99 | |
| Gletscher 15 Ton 22.1 HP | USD 5,399.99 | |
| VEVOR 5HP Portable 53L | USD 2,499.90 | |
| OMTech CW-5200 (Used) | USD 293.89 |
| Option | Condition | Cooling Capacity | Best Fit |
|---|---|---|---|
| CREWORKS 15 Ton | New | 15-ton class, 22.1 hp compressor | Large industrial heat loads, big tank |
| Gletscher 15 Ton | New | 15-ton class, 22.1 hp compressor | Same cooling tier with dual fans, lower listed price |
| VEVOR 5HP | New | 5HP / 15kW | Portable plastic-machinery cooling |
| OMTech CW-5200 | Used | Compact 0.93 hp compressor | Laser engraving/CNC, lowest listed price |
CREWORKS 15 Ton 22HP Industrial Air-Cooled Water Chiller with 53 gal. Water Tank
For a workshop that needs serious heat rejection, the CREWORKS is the one to start with. Its 22.1 hp compressor, 45 kW / 38,700 Kcal/hr cooling capacity, and 53-gallon (200 L) enclosed tank handle continuous-duty industrial processes. It flows up to 95 gpm and has brass inlet/outlet ports. The catch is that this unit runs on 480V/60Hz input and is built for a large footprint, so you need the facility wiring and floor space to support it.
Gletscher 15 Ton Air-cooled Industrial Water Chiller 22.1 HP with 53 Gal Tank
If you're already shopping the 15-ton tier, the Gletscher deserves attention because it lists at $5,399.99, which is $600 below the CREWORKS. It keeps the same 22.1 HP compressor power, a 53-gallon tank, and a 480V/60Hz input, while adding two 0.6 HP fans. The steel, ABS, copper, and brass construction suits industrial durability. The trade-off is that you're still committing to a 69 × 34 × 63 in frame and a 480V power setup.
VEVOR Air Cooled Chiller 5HP Portable 53L Tank for Plastic Machinery Industry
The VEVOR occupies the middle of the price range at $2,499.90. Its 5HP fully enclosed vortex compressor and 15 kW / 12,900 Kcal/h cooling capacity make it a practical match for plastic machinery that doesn't need the output of a 15-ton unit. The 53L tank keeps the package portable, and the finned condenser uses copper heat exchange tubes. The limitation is that a 5HP unit removes heat much more slowly than the 15-ton models, so it only suits equipment within its 15 kW output range.
Secondhand Industrial Water Chiller CW5200 for CNC CO2 Laser Engraver Cutter
The OMTech CW-5200 is the only used option and the least expensive at $293.89, making it an attractive entry point for small shops. It uses a 0.93 hp compressor with a 1.6-gallon (6 L) enclosed tank and a 2.6 gal/min flow rate, running on 110V/60Hz AC. It provides 5,186 BTU/hr of cooling and has an observation window for water-level checks. But its compact tank and used condition keep it out of industrial-scale duty; it's best for laser engravers and small CNC setups under its output rating.
Final Recommendation by Use Case
- For maximum heat removal and a large 53-gallon tank: CREWORKS 15 Ton 22HP.
- For the same 22.1 HP compressor class at a lower listed price: Gletscher 15 Ton.
- For a portable 5HP chiller with a 53L tank for plastic machinery: VEVOR 5HP.
- For the lowest listed price and a compact 110V chiller for laser/CNC: OMTech CW-5200.
