Choosing a walk-in cooler refrigeration system often comes down to one question: how much cooling power do you need, and how much of your equipment budget does it take? In the commercial industrial refrigeration systems space, two new systems illustrate that tension: the Walk-In Cooler Freezer Refrigeration System XML-100TP and the Turbo Air Medium Temp Refrigeration System for Walk-In Cooler. The first is the lower-priced option, and the second is the larger-horsepower option.
Quick verdict
If you want to keep the equipment spend low and already run single-phase power, the XML-100TP is the more direct fit. If you want more cooling capacity and a more detailed component package, the Turbo Air system is the system to plan around. The larger package asks for a larger equipment budget, but it also brings more specifications to evaluate before the install.
Listed prices at a glance
The table below shows the two listed prices and how they compare on an equal scale.
| Product | Listed Price | Price Bar |
|---|---|---|
| Walk-In Cooler Freezer Refrigeration System 1HP XML-100TP | $3,750.00 | |
| Turbo Air 1.5 HP Walk-In Cooler Refrigeration System | $6,500.00 |
The decision really starts with these two figures. The XML-100TP is the lower-cost entry point, while the Turbo Air system is the larger capital outlay. That difference matters because the two systems also differ in horsepower, electrical service, and the depth of the component specification.
Where each system wins
- The XML-100TP wins on price and service simplicity: it runs on 220V single-phase and includes a remote air-cooled condenser.
- The Turbo Air system wins on power and specification depth: it has a scroll compressor, uses R448a refrigerant, and comes with a 13,700 BTU low-profile evaporator. Its listed attributes also show a United States country of origin, while the XML-100TP lists China.
Product notes
Walk-In Cooler Freezer Refrigeration System 1HP XML-100TP
This new system carries the lower of the two listed prices and is described as a walk-in cooler/freezer refrigeration package. It runs on 220V, 1 phase, 60Hz and includes a remote air-cooled condenser, which is useful when the condenser needs to sit away from the cooler. For a smaller commercial operation that already has single-phase service and doesn't need extra horsepower, this package is the lower-cost route. It is described as a complete system with the condensing unit and evaporator in one package. The caveat is capacity: with less horsepower than the Turbo Air system, it is better matched to a lighter cooling load. If you're choosing between the two listed systems, the XML-100TP is the more economical up-front choice.
Turbo Air 1.5 HP Walk-In Cooler Refrigeration System
This new system carries the higher of the two listed prices and is positioned as a medium-temp walk-in cooler refrigeration system. The condensing unit is a scroll compressor model rated for 208-230V/1Ph/60Hz, and the package includes one ADR137AENM low-profile evaporator rated at 13,700 BTU. It uses R448a refrigerant, and the evaporator has an EC motor with dual-speed and dual-voltage capability at 115V/1Ph/60Hz. That combination makes it the stronger choice when larger cooling capacity and a more detailed component package match your expected requirement. The limitation is the price and the electrical setup: it is the costlier option, and the condenser and evaporator run at different voltage categories, which means more planning for your electrical hookup.
Final choice
- Choose the XML-100TP if your equipment spend is at the lower end of these two listed prices and you want a complete walk-in cooler/freezer package.
- Choose the Turbo Air system if your budget covers the higher listed price and you need the higher-capacity medium-temp walk-in cooler package, knowing that the condenser and evaporator use separate voltage feeds.
