Choosing an industrial water chiller for a commercial facility usually comes down to one question: how much cooling do you actually need? Pick too small and your process heat builds up; pick too large and you pay for capacity you will not use. The Uimoso air-cooled industrial water chiller, priced at USD 2,588.99, addresses that question by offering several compressor and tank combinations inside one product range.
Quick verdict
If you are shopping for commercial industrial refrigeration systems and need a mid-range air-cooled chiller, the Uimoso is a serious candidate. It is not a single fixed unit: the range includes seven configurations based on compressor horsepower, from 5HP to 25HP, with water tank capacities at 53L, 60L, 140L, 150L, 200L, and 250L. The right version depends entirely on your process load.
Who it suits
Facilities with steady process-cooling needs and room for an air-cooled condenser. The fully enclosed vortex compressor is described as producing low vibration and low noise, which makes it easier to live with near occupied work areas. If your operation has fluctuating or very high heat loads, you will want to size carefully rather than assume one unit covers all scenarios.
What stands out
The most useful feature is the spread of horsepower options in one range: 5HP, 6HP, 12.3HP, 15HP, 16.67HP, and 25HP. That lets you match the chiller to your flow and heat load without jumping to a different product family. The described cooling capacities start at 15KW and reach 70.32KW on the 25HP version, and the 250L tank capacity supports larger process loops. The R407 refrigerant and copper heat exchange tubes are included in the stated specifications.
The tank sizes also give you a practical way to think about buffer volume. A 53L tank suits a compact loop, while 200L or 250L gives you more thermal mass for larger setups.
Meaningful trade-offs
The product carries a single price point: USD 2,588.99. Because the range spans so many horsepower and tank combinations, the price likely applies to a specific configuration rather than every possible option. The title also refers to 5/6/8/15/20 ton positions, while the description names seven variants including 12.3HP and 16.67HP. Those two sets of numbers do not line up neatly, so use the horsepower and tank capacity figures as your primary selection guide and leave tonnage labels out of the final decision.
Another trade-off is the matching problem: because the range spans small and large configurations, you need to be precise about your load before choosing. The air-cooled design is a notable feature, but the practical sizing still depends on your process conditions.
Bottom line
The Uimoso air-cooled industrial water chiller range is a flexible choice for commercial industrial refrigeration when you know your required horsepower and tank size. The 5HP/53L starting point suits lighter duty loops, while the 25HP/250L top end with 70.32KW cooling capacity is the biggest configuration described. Focus on the compressor size and tank volume, not the tonnage wording, and keep in mind that the single listed price may not be uniform across all seven configurations.
Uimoso 5/6/8/15/20 ton Air-cooled Industrial Water Chiller 5HP to 25HP Chiller
For a small or moderate process loop, the 5HP configuration with a 53L tank gives you a compact starting point. For a larger system, the 25HP unit with a 250L tank and 70.32KW cooling capacity is the most substantial option described. The main limitation: only one price, USD 2,588.99, appears for the entire range, and the description does not specify whether that price covers every horsepower and tank size or just one. Match your heat load and water volume to the listed 5HP-25HP options, and you will know exactly which configuration makes sense for your facility.
