When you're selecting a commercial industrial refrigeration system, the decision usually comes down to a fixed-spec package versus a flexible platform. Air-cooled industrial water chillers remove heat through ambient air exchange, making them a common choice for process cooling, but the procurement question is whether you need one fixed configuration or a platform you can match to your load. The Gletscher 15 Ton Air-cooled Industrial Water Chiller and the Uimoso 5/6/8/15/20 ton Air-cooled Industrial Water Chiller both target serious continuous-duty cooling, but they take different routes. The Gletscher is a complete package with a built-in tank and a fixed compressor rating, while the Uimoso spans multiple compressor sizes and tank configurations. Here's how to pick between them.
Quick Verdict
If you want a single, fully specified system with one set of numbers, the Gletscher is the one-package approach. If you need a range of power options and the lower listed price, the Uimoso platform gives you configurations to match. Use the table below for the compact price and spec comparison.
At a Glance
| Attribute | Gletscher 15 Ton | Uimoso 5/6/8/15/20 Ton |
|---|---|---|
| Listed price | USD 5,399.99 | USD 2,588.99 |
| Cooling capacity | 153,546 BTU/hr (45 kW) | 5/6/8/15/20 ton configurations |
| Compressor power | 22.1 HP (16.5 kW) | 5HP to 25HP across configurations |
| Integrated tank | 53 gal (200L) enclosed | 53L to 250L across configurations |
Where Each System Wins
Gletscher 15 Ton. The win here is a complete fixed specification: a single cooling output, a built-in tank, and circulation rated up to 360 L/min (95 GPM). The 480V/60Hz input and 1.5-inch inlet/outlet are part of the single configuration, so you know exactly what you're planning around.
Uimoso 5/6/8/15/20 Ton. The win here is flexibility. The platform covers multiple compressor power levels, spans several tank sizes, and includes a fully enclosed vortex compressor, R407 coolant, copper heat exchange tubes, and a 45℃ condensation temperature. If your facility's cooling demand varies, the range of options is the deciding feature.
Product Notes
Gletscher 15 Ton Air-cooled Industrial Water Chiller 22.1 HP with 53 Gal Tank
This is the single-package option at the higher listed price. Everything is defined in one fixed configuration: 153,546 BTU/hr (45 kW) of capacity, a 22.1 HP compressor, a 53-gallon tank, and circulation up to 360 L/min (95 GPM). The steel, ABS, copper, and brass construction and the 69 x 34 x 63-inch footprint give you concrete dimensional data to plan with. The dual 0.6 HP fans and 6.5 CFM airflow are also part of the spec. Choose it when you want one set of numbers to design around, especially if your process needs a chiller in this capability class. The limitation is that the configuration is fixed at 15 tons, so it's only the right fit when your demand lands at that capacity and your budget covers the higher listed price.
Uimoso 5/6/8/15/20 ton Air-cooled Industrial Water Chiller 5HP to 25HP Chiller
This is the lower-priced option of the two, and the product name spells out the flexibility: 5, 6, 8, 15, and 20 ton options with 5 HP to 25 HP compressors. Tank capacities run from 53L to 250L across the configurations, so the platform is intended to adapt to different loads. It also includes a fully enclosed vortex compressor, R407 coolant, copper heat exchange tubes, and a 45℃ condensation temperature. Choose it when you want a range of configurable options. The trade-off is that you need to identify which specific configuration within the platform matches your capacity requirement, because the product line covers a range of builds rather than one fixed spec.
Final Choice by Use Case
- Fixed 15-ton load with a built-in tank: Choose the Gletscher for its one-package spec and high circulation rate.
- Multiple load sizes or flexible capacity: Choose the Uimoso for its broad compressor range and multiple tank options.
