Choosing a commercial industrial refrigeration system starts with one practical question: are you buying the walls, the cooling engine, or the whole walk-in? The four products here cover that range, with listed prices from USD 310.00 for a single US-made walk-in panel to USD 10,585.99 for a complete 8' x 12' x 88" walk-in cooler with a Turbo Air refrigeration system. Matching the right option to your foodservice setup depends on the box you already have and how much of the build you want to handle yourself.
Quick Take
- Need to build or extend a walk-in shell? The US-made walk-in cooler and freezer panels are sold per panel and give you 47" x 104" of cam-lock wall section.
- Need to power an existing box? The 1HP Walk-In Cooler Freezer Refrigeration System is a 220V 1-phase remote-condenser setup aimed at a walk-in cooler or freezer.
- Need a new box without choosing a refrigeration system yet? The Astra 8' x 8' x 8' Walk-In Cooler gives you an NSF- and UL-certified enclosure, with the floor and refrigeration system left as separate decisions.
- Need the largest all-in-one option? The 8' x 12' x 88" Walk-In Cooler with Turbo Air Refrigeration System pairs a larger box with a brand-name refrigeration system in one product.
Listed Price Comparison
| Product | Listed Price | Price Bar |
|---|---|---|
| US-Made Walk-In Cooler & Freezer Panels (per panel) | USD 310.00 | |
| 1HP Walk-In Cooler Freezer Refrigeration System | USD 3,750.00 | |
| Astra 8' x 8' x 8' Walk-In Cooler | USD 4,290.00 | |
| 8' x 12' x 88" Walk-In Cooler with Turbo Air | USD 10,585.99 |
Decision Matrix
| If your priority is... | The product that fits best |
|---|---|
| Building or repairing a walk-in shell from the ground up | US-Made Walk-In Cooler & Freezer Panels |
| Adding 220V refrigeration power to a walk-in you already own | 1HP Walk-In Cooler Freezer Refrigeration System |
| A ready-to-assemble cooler box with your own refrigeration choice | Astra 8' x 8' x 8' Walk-In Cooler |
| A larger full walk-in package with cold storage and cooling equipment | 8' x 12' x 88" Walk-In Cooler with Turbo Air |
Product Notes
US-Made Walk-In Cooler & Freezer Panels
The panel is a 47" x 104" wall section made with foamed-in-place polyurethane and a cam-lock tongue-and-groove design. The same panel family can serve cooler duty at 3-1/2" thickness or freezer duty at 4", and the title points to NSF gaskets along the seams. If you are building or expanding a walk-in shell, this is the only product in the group where you can buy panels individually at the listed per-panel price. The limitation is scope: a panel is not a walk-in. You will need enough matching panels, a ceiling, and a separate refrigeration system to create a working walk-in.
1HP Walk-In Cooler Freezer Refrigeration System
Built around a 1HP air-cooled remote condenser unit, this new system is listed for 220V 1-phase 60Hz service and is identified by model XML-100TP. It is a complete refrigeration system, so it makes sense when you already have a walk-in enclosure or a room that needs the cooling side handled. The concrete limitation is that the box itself isn't part of this product; you will need a separate walk-in enclosure or room to pair with it. If your build still needs walls, you would pair this with the US-made panels rather than expect a ready-to-run walk-in.
Astra 8' x 8' x 8' Walk-In Cooler
This product gives you a new 8' x 8' x 8' walk-in cooler box with modular cam-lock construction, and the title lists NSF and UL certification. The floor and refrigeration system are not included unless selected as listing options, so this is a good choice if you want to pair the box with a refrigeration package you select separately. That is also its main limitation: the cooler box alone will not keep anything cold until you add a floor and a cooling system. Budget for those extras when comparing this to all-in-one walk-ins.
8' x 12' x 88" Walk-In Cooler with Turbo Air
At the top of the listed price range, this walk-in pairs an 8' x 12' x 88" cooler with a Turbo Air refrigeration system and is offered with factory-direct pricing. It is the largest footprint in this group and the only one that bundles the walk-in box with a named refrigeration brand in the product title. The limitation is the price: it is the highest listed price among the four, so it makes sense when you want a bigger complete system rather than a panel-by-panel or box-only build.
Final Recommendation by Use Case
Start with the scope of your project. If you are building or expanding a walk-in shell, the US-made panels give you a useful building block at the lowest listed price in this group. If the shell already exists and you just need a 220V 1HP refrigeration system, the XML-100TP system is the direct match. If you need a walk-in box and want to control the cooling equipment choice, the Astra 8' x 8' x 8' box is the one to start with. And if you want the most complete ready-specified package, the 8' x 12' x 88" walk-in with Turbo Air covers both the enclosure and the refrigeration system in one listed price.
