When a heating or cooling problem shows up in the thermostats, HVAC controls, and sensors space, the part that often makes the difference is the control board. The board takes the signal from the thermostat and turns it into action for the fan, gas valve, or compressor. When it fails, the replacement decision comes down to brand fit, condition, and cost. The listed choices here span from $49.75 to $199.99, so the right match matters as much as the price.
Quick take
If your furnace is a Rheem, start with the Rheem board that matches your furnace family. If your system is Goodman, Amana, or Daikin, the Goodman board is the new-part route at a far lower listed cost. If used parts are acceptable and you want the least expensive way into a replacement, the used CQC air conditioner control board is the lower-cost path.
Listed prices at a glance
| Product | Listed price | Price bar |
|---|---|---|
| Rheem OEM Furnace HVAC Integrated Control Board, 62-104061-05 | USD 199.99 | |
| Rheem 62-105217-01 Integrated Furnace Control Board for HVAC Systems | USD 182.09 | |
| PCBCM301V0001S Goodman Control Board Amana Daikin HVAC Systems PCBCM301 V0001 | USD 60.00 | |
| HVAC AIR CONDITIONER CONTROL BOARD CQC14134104969 | USD 49.75 |
Decision matrix
- Choose the Rheem OEM 62-104061-05 when your furnace falls in the R802VA family and you want a matched Rheem replacement.
- Choose the Rheem 62-105217-01 when your furnace is the R801TAJM model and you want a new board with that specific part number.
- Choose the PCBCM301V0001S Goodman board when your equipment is Goodman, Amana, or Daikin and you want a new board without the top-of-range cost.
- Choose the CQC14134104969 when you want the lowest listed purchase and are comfortable with a used control board.
Product notes
Rheem OEM Furnace HVAC Integrated Control Board, 62-104061-05
The top-priced board in this set is also the one that combines a Rheem name, a new-open-box condition, and a compatibility list that starts with the R802VA furnace family. It is a genuine OEM replacement part, and it ships without original factory packaging. If your furnace is in that R802VA group, this is the most direct Rheem-to-Rheem replacement among the four. The trade-off is the cost: it carries the highest listed price here, and the open-box condition means the presentation is not factory-fresh. This board makes the most sense when a matched Rheem part matters more than upfront savings.
Rheem 62-105217-01 Integrated Furnace Control Board for HVAC Systems
The second Rheem board sits just below the top of the range and is the option with a specific R801TAJM furnace callout. It is new, carries the part number 62-105217-01, and includes a 24-volt rating and a 6.1-by-8.7-inch footprint. If your furnace is the R801TAJM, this is the new Rheem board that aligns with that application. The limitation is the narrow fit: the compatibility points to the R801TAJM family rather than the R802VA group used for the other Rheem board. For an R801TAJM furnace, it is the more specific Rheem choice; for a different furnace, it is not the right starting point.
HVAC AIR CONDITIONER CONTROL BOARD CQC14134104969
This is the most affordable board in the group, and it is also the only one listed as used. Its title identifies it as an air conditioner control board with the model number CQC14134104969, so it is not positioned as a furnace integrated control board. For a lower-cost repair on an air conditioner, it keeps the initial purchase smaller than any of the new boards. The limitation is the used condition: you are accepting more uncertainty than you would with a new part. If your project requires a factory-new control board, this one does not meet that requirement. As a lower-cost used option, it is the easiest way into the lowest listed purchase.
PCBCM301V0001S Goodman Control Board Amana Daikin HVAC Systems PCBCM301 V0001
This Goodman board is the lower-priced new option among the four, and its title ties it to Goodman, Amana, and Daikin HVAC systems. The part number is PCBCM301V0001S, with the model shown as PCBCM301 V0001. For a Goodman-family system, it gives you a new board while leaving more of your budget intact than the Rheem boards. The limitation is fit: it is not described as a Rheem furnace board, so it is not the first pick for the Rheem furnace applications in this guide. It arrives without an original box. If your unit is Goodman, Amana, or Daikin, this is the new board to weigh against the used CQC option.
Final recommendation by use case
For a Rheem furnace that matches the compatibility list of the 62-104061-05, start with that board. For a Rheem furnace that matches the 62-105217-01 application, choose that board. For Goodman, Amana, or Daikin equipment, pick the PCBCM301V0001S Goodman board. If you want the lower-cost used route and are comfortable with a previously owned board, the CQC14134104969 is the lowest-cost option.
