When you need to remove condensate from an air handler or furnace, the decision usually comes down to flow rate, lift height, and how much noise the pump makes. Today's comparison puts two pump options in front of you: both carry the 100V-240V 80GPH HVAC Condensate Pump w/ Automatic Safety Alarm 20ft Lift DCMotor title, and both are priced at USD 41.99. On paper, the two options are identical. That makes the real decision about whether this pump's feature set fits your installation, not about choosing between two different products.
Quick verdict: Go with either pump if you need an automatic condensate pump that can move 80 gallons per hour and lift water 20 feet vertically. Both come with an ultra-quiet 25W DC motor, a Hall-sensor automatic on/off function, and a high-level safety switch that triggers a buzzer alarm. There is no price or spec advantage between them, so your final choice should rest on which option you prefer to buy.
Price and feature comparison
| Product | Price | Price Bar | Flow | Lift | Power | Safety |
|---|---|---|---|---|---|---|
| 100V-240V 80GPH HVAC Condensate Pump | USD 41.99 | 80 GPH | 20 ft | 25W | High-level alarm | |
| 100V-240V 80GPH HVAC Condensate Pump | USD 41.99 | 80 GPH | 20 ft | 25W | High-level alarm |
Where each option stands
There is no product-level winner here. The first pump and the second pump share the same power cord length, the same 4.3-inch height, the same 9.5-inch length, and the same 2.5-pound weight. They also share the same automatic start and stop points-starting at 1.4 inches and stopping at 0.8 inches-so you will get the same hands-free operation either way. If you see a reason to prefer one option over the other, it is not based on anything in the pump's specs, price, or stated features.
100V-240V 80GPH HVAC Condensate Pump w/ Automatic Safety Alarm 20ft Lift DCMotor
The first pump offers a compelling reason to choose it: the complete condensate-removal package at one flat price. At USD 41.99, you get an 80 GPH flow rate, a 20-foot vertical lift, and a 25W DC motor that is designed to operate quietly. The automatic on/off function means you don't have to monitor the reservoir, and the 7.4-foot power cord gives you flexibility in positioning. The main limitation is the safety-alarm wiring: the high-level switch requires connecting the two signal leads to your HVAC, so you cannot rely on the alarm unless you complete that wiring. For a straightforward condensate drain setup, this pump covers the basics well.
100V-240V 80GPH HVAC Condensate Pump w/ Automatic Safety Alarm 20ft Lift DCMotor
The second pump is exactly the same model, but it deserves its own note because it offers the same features at the same price. You still get the 80 GPH capacity, 20-foot lift, ultra-quiet DC motor, and automatic on/off via Hall sensor. The big draw is the high-level safety switch with a buzzer alarm and one-touch mute, which gives you a layer of overflow protection if you connect the signal leads to your HVAC. The limitation is practical: the alarm and safety shutdown only function when that wiring is connected, so skipping the wiring leaves you without the high-water protection. At USD 41.99, this option is best for someone who plans to wire the safety leads and wants the full protection feature set.
Final choice by use case
- For a basic condensate drain with up to 20 feet of lift and quiet operation: either pump works because both have identical specs and price.
- For high-water protection: choose either option, but make sure you wire the two signal leads to your HVAC so the buzzer alarm and safety switch can work.
- If the price is the only variable: both are USD 41.99, so the tie stays unbroken.
